Products
-
FRP Mixing Tank
-
Calcium Chloride EPC Project
-
FRP Corrosion-Resistant Tank
-
FRP Hydrochloric Acid Tank
-
PPH Agitator tank
-
FRP reaction tanks
-
Scrubbing tower
-
Vertical FRP Tank
-
Round Counterflow Cooling Tower
-
Cooling Tower
-
Potassium Sulfate EPC Project
-
FRP anode tubes
-
Air cooled heat exchanger
-
FRP pipes
-
FRP water tanks
-
FRP Reactor
Wet electrostatic precipitator
Wet electrostatic precipitator equipment has the powerful function of capturing fog droplets, dust and fine dust particles in flue gas, and it has many years of successful application performance in domestic chemical, smelting, building materials and other industries, and has nearly 30 years of history in foreign coal-fired power plants.
Description
marker
Wet electrostatic precipitator equipment has the powerful function of capturing fog droplets, dust and fine dust particles in flue gas, and it has many years of successful application performance in domestic chemical, smelting, building materials and other industries, and has nearly 30 years of history in foreign coal-fired power plants.
Shandong Dahua's wet electrostatic precipitator is a high-efficiency purification and dust removal equipment made of high-grade corrosion-resistant vinyl resin and glass fiber. It is made by winding and hand lay-up molding . The equipment body is mainly composed of the upper shell, the middle shell, the anode tube bundle group, the cathode corona wire system, the rectifier plate, the diversion (wind) plate, the spray flushing system, the insulator room and other components.
contact us
Related popular products
Evaporative condenser
Based on the working principle of thermodynamic heat transfer, the evaporative condenser makes the high-temperature gaseous refrigerant in the coil exchange heat with the spray water and air outside the coil. The super wind force of the induced draft fan makes the spray water completely cover the surface of the coil, and the heat exchange effect is significantly increased by the wind force of the water. After absorbing heat spray water and air temperature, some water from liquid to gas, the latent heat of evaporation take away a lot of heat, heat the water in the air is dehydrator intercept and collected the water in the heat transfer in heat transfer layer by air cooling, temperature lowering into the sump tank, by circulating water pump to spray again continue to cycle in the system. The water evaporating into the air is automatically replenished by the control of the floating ball valve .
FRP pipes
FRP pipe is a kind of computer-controlled mechanical winding from the production of products, is a light,high-strength,corrosion-resistant non-metallic pipe.It is made of resin as matrix and glass fiber as reinforcing material by special process. lt has the advantages of corrosion resistance,anti-leakage,heat insulation,light weight, high strength,long service life,strong designability,small fluid resistance,convenient installation and low cost,etc.
FRP anode tubes
Glass Fiber Reinforced Plastic（FRP） anode tubes are widely utilized across various industries, including electronics, petroleum, chemical, power supply, printing, and waste treatment owing to their excellent corrosion resistance, high-temperature tolerance, and other superior properties. We provide comprehensive one-stop services for clients in need, encompassing the design, manufacturing, installation, and after-sales support of anode tubes and their auxiliary facilities.
Square cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
PPH tower
On the basis of giving full play to its own advanced technology, Dahua company has been constantly innovating and improving for many years to produce various towers for chemical process application and waste gas treatment tower for environmental protection project, reaching the advanced level of the industry. Contains distillation tower, separation tower, drying tower, deodor tower, washing tower, absorption tower and so on. The technical index of the product is constantly improved.
Air cooled heat exchanger
Air cooler of finned tube bundle, blower, motor, shutter and maintenance platform and frame parts, divided into drum wind, wind,inclined top three.Operation of the air cooler are cooled material through the tube, air under the action of fan, cross from outside fin tube, using the temperature difference between the two, make the high temperature material of tube cooling and condensation.
Potassium Sulfate EPC Project
Based on the original German Mannheim process for potassium sulfate production, we have conducted...
FRP Exhaust Gas Absorption Tower
Fiberglass has excellent resistance to acid, alkali, and various chemical substances, and can resist the erosion of complex components in exhaust gas. It is suitable for treating various corrosive exhaust gases, extending equipment service life, and reducing maintenance costs.
Horizontal FRP Tanks
Glass fiber reinforced plastic（FRP） tank is a kind of glass fiber reinforced plastic products. It is a new type of composite material made by glass fiber and resin and wound by a microcomputer controlled machine. It is composed of corrosion resistant lining layer, seepage proof layer, fiber winding strengthening layer and outer protective layer with high resin content.
FRP bromine towers
Glass fiber reinforced plastic (FRP) bromine tower equipment is mainly used to produce bromine. In order to ensure the bromine extraction rate, we have adjusted the spacing, direction, order and angle so as to acidify the brine first and then add chlorine to reduce the amount of chlorine in production.And we add annular baffle plate (efficiency enhancement ring) in the blowout tower and absorption tower, make the brine of the wall into the filler ring for secondary and third blowing,which avoid the bromine in the brine not being blown out and discharged with the waste water, resulting in waste of resources.
FRP on-site winding tanks
Shandong Dahua New Materials Co., Ltd. is a professional manufacturer of glass fiber reinforced plastic（FRP）containers and chemical tower equipment, with rich practical experience.When the diameter of the required FRP container is large and inconvenient to transport, it will give priority to on-site winding production.Our company has carried out on-site winding tank making for many enterprises and has won unanimous praise.
FRP Liquid Alkali Storage Tank
Good corrosion resistance: Fiberglass can withstand the corrosion of liquid alkali, prevent the tank from being corroded, extend service life, and reduce the risk of liquid alkali leakage caused by tank corrosion.
Circular cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
Square Counterflow Cooling Tower
It adopts the principle of counterflow cooling: hot water flows uniformly down from the top of the cooling tower, while air flows upward from the bottom of the tower, forming counterflow heat exchange. This method enables full contact between hot water and cold air, prolongs heat exchange time, and improves cooling efficiency. Compared to other cooling methods, it can more effectively reduce water temperature.
Scrubbing tower
The FRP scrubbing tower mainly takes the vertical counter-current FRP scrubbing tower as the leading product. It utilizes the contact between the waste gas and the liquid, in which the liquid adsorbs the pollutants, and then separates the clean gas from the contaminated liquid to achieve the purpose of purification.
