Products
-
Evaporative condenser
-
FRP chimneys
-
FRP on-site winding tanks
-
Scrubbing tower
-
Potassium Sulfate EPC Project
-
Circular cooling towers
-
PPH tower
-
FRP Wastewater Storage Tank
-
FRP Corrosion-Resistant Tank
-
Wet electrostatic precipitator
-
FRP pipes
-
FRP Exhaust Gas Absorption Tower
-
Round Counterflow Cooling Tower
-
FRP Mixing Tank
-
FRP bromine towers
-
Cooling Tower
FRP Scrubber Tower
Made of fiberglass material, it has good resistance to chemicals such as acid, alkali, and salt, and can be used to handle various corrosive gases and liquids. It can effectively resist the erosion of chemicals and extend the service life of equipment.
Description
marker
Strong corrosion resistance
Made of fiberglass material, it has good resistance to chemicals such as acid, alkali, and salt, and can be used to handle various corrosive gases and liquids. It can effectively resist the erosion of chemicals and extend the service life of equipment.
Efficient purification
The unique structural design and rinsing process enable full contact between gas and liquid, effectively removing pollutants such as sulfur dioxide, nitrogen oxides, hydrogen chloride and other acidic gases, as well as dust, particulate matter, etc., resulting in high purification efficiency.
contact us
Related popular products
PPH Agitator tank
The agitator of various types and materials has the same corrosion resistance as the tank.It is used for chemical reactions such as neutralization,oxidation, reduction, precipitation, flocculation, preparation, mixing and dilution of chemical media.lt can replace and make up the deficiency of stainless steel, glass lining, glass lining and fiberglass equipment.
Potassium Sulfate EPC Project
Based on the original German Mannheim process for potassium sulfate production, we have conducted...
FRP Corrosion-Resistant Tank
It can resist the erosion of various chemical substances such as acid, alkali, salt, etc., and is suitable for storing and processing various corrosive media. It can greatly reduce the risk of tank damage and leakage caused by corrosion, and extend the service life of equipment.
Square cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
FRP anode tubes
Glass Fiber Reinforced Plastic（FRP） anode tubes are widely utilized across various industries, including electronics, petroleum, chemical, power supply, printing, and waste treatment owing to their excellent corrosion resistance, high-temperature tolerance, and other superior properties. We provide comprehensive one-stop services for clients in need, encompassing the design, manufacturing, installation, and after-sales support of anode tubes and their auxiliary facilities.
FRP bromine towers
Glass fiber reinforced plastic (FRP) bromine tower equipment is mainly used to produce bromine. In order to ensure the bromine extraction rate, we have adjusted the spacing, direction, order and angle so as to acidify the brine first and then add chlorine to reduce the amount of chlorine in production.And we add annular baffle plate (efficiency enhancement ring) in the blowout tower and absorption tower, make the brine of the wall into the filler ring for secondary and third blowing,which avoid the bromine in the brine not being blown out and discharged with the waste water, resulting in waste of resources.
Closed Circuit Cooling Towers
The DGCC Series Tube-and-Header Type Closed Circuit Cooling Towers employ advanced latent heat transfer technology, delivering significantly higher heat exchange efficiency compared to traditional sensible heat transfer methods.Featuring a PVC-free heat exchange layer with an all-coil structure, the tower eliminates common issues associated with conventional open towers, such as packing clogging and aging.
FRP Liquid Alkali Storage Tank
Good corrosion resistance: Fiberglass can withstand the corrosion of liquid alkali, prevent the tank from being corroded, extend service life, and reduce the risk of liquid alkali leakage caused by tank corrosion.
Scrubbing tower
The FRP scrubbing tower mainly takes the vertical counter-current FRP scrubbing tower as the leading product. It utilizes the contact between the waste gas and the liquid, in which the liquid adsorbs the pollutants, and then separates the clean gas from the contaminated liquid to achieve the purpose of purification.
FRP Cooling Tower
Adopting efficient heat dissipation design, hot water can be quickly cooled to the required temperature through heat exchange between air and water. With its high cooling efficiency,it can meet the cooling water temperature requirements for different production processes and equipment operations .
FRP Wastewater Storage Tank
Utilizing an integral molding process, the tank has no welds, or any seams are specifically processed. This effectively avoids leakage issues common in traditional metal storage tanks caused by factors like corrosion at welded joints. It ensures the safety of stored substances and prevents environmental contamination.
Air cooled heat exchanger
Air cooler of finned tube bundle, blower, motor, shutter and maintenance platform and frame parts, divided into drum wind, wind,inclined top three.Operation of the air cooler are cooled material through the tube, air under the action of fan, cross from outside fin tube, using the temperature difference between the two, make the high temperature material of tube cooling and condensation.
FRP chimneys
The fiberglass chimney is processed by winding with FRP(Fiberglass Reinforced Plastic)raw materials.The product has the characteristics of low cost,short production cycle,long service life,light weight,high strength,high rigidity,simple installation,smooth inner and outer surfaces,good anti-aging performance,and excellent corrosion resistance.Moreover,sprayers,filters,etc.can be conveniently added to absorb the harmful components in the flue gas.
Cooling Tower
The surface of fiberglass cooling towers is smooth and can be made in various colors and shapes, which can coordinate with the surrounding environment and have good decorative properties, especially suitable for places that require environmental aesthetics.
FRP water tanks
Glass Fiber Reinforced Plastic (FRP) water tank is a kind of water storage equipment made of composite materials.The tank is manufactured through high-temperature and high-pressure molding processes. It uses food-grade resins and fiberglass reinforcement, which guarantees water safety and hygiene standards.The product features a modular design with diversified standard panel specifications and optional thickness configurations.The water tank has the advantages of anti-aging, anti-leakage, easy to clean, and long service life.
