Products
-
FRP bromine towers
-
Closed Circuit Cooling Towers
-
FRP chimneys
-
Evaporative condenser
-
FRP Desulfurization Tower
-
Scrubbing tower
-
FRP Scrubber Tower
-
Calcium Chloride EPC Project
-
FRP Exhaust Gas Absorption Tower
-
Vertical FRP Tank
-
Potassium Sulfate EPC Project
-
FRP on-site winding tanks
-
FRP reaction tanks
-
PPH tower
-
FRP Corrosion-Resistant Tank
-
FRP Wastewater Storage Tank
FRP pipes
FRP pipe is a kind of computer-controlled mechanical winding from the production of products, is a light,high-strength,corrosion-resistant non-metallic pipe.It is made of resin as matrix and glass fiber as reinforcing material by special process. lt has the advantages of corrosion resistance,anti-leakage,heat insulation,light weight, high strength,long service life,strong designability,small fluid resistance,convenient installation and low cost,etc.
Description
marker
FRP sand pipe reinforced by filament winding has the advantages of reliability, pressure resistance and economy. lt is mainly used for buried pipelines and long-distance pipelines,with the characteristics of light weight,high strength,corrosion resistance,long service life,low operation and maintenance costs, it can save a lot of funds for construction projects.
Duct Features:
1.Lightweight,high strength and easy to transport and install, the weight of FRP sand pipe is the same diameter of cast iron pipe 1/4,1/10 of cement pipe, reduce the construction costs, improve the installation speed. etc..
2.Good hydraulics and smooth inner surface can reduce pressure loss,increase flow rate, reduce project investment and save energy consumption.
3.Good corrosion resistance, long service life,no rust, also can be used to transport sewage,mud,seawater and other media.
4.the interface adopts double “O” type sealing ring socket connection, the seal is reliable and does not leak, will not break.
5.according to different pressure, medium, stiffness (or buried depth) requirements, design and manufacture of different pressure levels and special performance of FRP pipes
6.Anti-fouling, non-toxic. The smooth inner wall does not scale, does not breed micro-organisms and so on algae, does not have the secondary pollution to the water quality. Pipes made from food grade resins can be used to transport drinking water.
contact us
Related popular products
Potassium Sulfate EPC Project
Based on the original German Mannheim process for potassium sulfate production, we have conducted...
FRP reaction tanks
FRP reaction tank,a wide range of advanced technology,stable quality,corrosion resistance,easy to operate and so on.Widely used in petroleum,chemical,food,medicine,pesticide.scientific research and other industries,is used to complete the polymerization, condensation,vulcanization,hydrocarbon,hydrogenation and other chemical processes of reaction equipment.
FRP bromine towers
Glass fiber reinforced plastic (FRP) bromine tower equipment is mainly used to produce bromine. In order to ensure the bromine extraction rate, we have adjusted the spacing, direction, order and angle so as to acidify the brine first and then add chlorine to reduce the amount of chlorine in production.And we add annular baffle plate (efficiency enhancement ring) in the blowout tower and absorption tower, make the brine of the wall into the filler ring for secondary and third blowing,which avoid the bromine in the brine not being blown out and discharged with the waste water, resulting in waste of resources.
Circular cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
Evaporative condenser
Based on the working principle of thermodynamic heat transfer, the evaporative condenser makes the high-temperature gaseous refrigerant in the coil exchange heat with the spray water and air outside the coil. The super wind force of the induced draft fan makes the spray water completely cover the surface of the coil, and the heat exchange effect is significantly increased by the wind force of the water. After absorbing heat spray water and air temperature, some water from liquid to gas, the latent heat of evaporation take away a lot of heat, heat the water in the air is dehydrator intercept and collected the water in the heat transfer in heat transfer layer by air cooling, temperature lowering into the sump tank, by circulating water pump to spray again continue to cycle in the system. The water evaporating into the air is automatically replenished by the control of the floating ball valve .
FRP Mixing Tank
The noise generated by the fiberglass mixing tank during operation is relatively small, because the fiberglass material itself has certain shock absorption and noise reduction performance.
FRP Exhaust Gas Absorption Tower
Fiberglass has excellent resistance to acid, alkali, and various chemical substances, and can resist the erosion of complex components in exhaust gas. It is suitable for treating various corrosive exhaust gases, extending equipment service life, and reducing maintenance costs.
FRP Corrosion-Resistant Tank
It can resist the erosion of various chemical substances such as acid, alkali, salt, etc., and is suitable for storing and processing various corrosive media. It can greatly reduce the risk of tank damage and leakage caused by corrosion, and extend the service life of equipment.
Square cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
FRP Reactor
The fiberglass reaction vessel has good anti-corrosion and temperature resistance, making it a high-performance and easy-to-use reaction vessel.
Air cooled heat exchanger
Air cooler of finned tube bundle, blower, motor, shutter and maintenance platform and frame parts, divided into drum wind, wind,inclined top three.Operation of the air cooler are cooled material through the tube, air under the action of fan, cross from outside fin tube, using the temperature difference between the two, make the high temperature material of tube cooling and condensation.
FRP on-site winding tanks
Shandong Dahua New Materials Co., Ltd. is a professional manufacturer of glass fiber reinforced plastic（FRP）containers and chemical tower equipment, with rich practical experience.When the diameter of the required FRP container is large and inconvenient to transport, it will give priority to on-site winding production.Our company has carried out on-site winding tank making for many enterprises and has won unanimous praise.
FRP Wastewater Storage Tank
Utilizing an integral molding process, the tank has no welds, or any seams are specifically processed. This effectively avoids leakage issues common in traditional metal storage tanks caused by factors like corrosion at welded joints. It ensures the safety of stored substances and prevents environmental contamination.
FRP Scrubber Tower
Made of fiberglass material, it has good resistance to chemicals such as acid, alkali, and salt, and can be used to handle various corrosive gases and liquids. It can effectively resist the erosion of chemicals and extend the service life of equipment.
Closed Circuit Cooling Towers
The DGCC Series Tube-and-Header Type Closed Circuit Cooling Towers employ advanced latent heat transfer technology, delivering significantly higher heat exchange efficiency compared to traditional sensible heat transfer methods.Featuring a PVC-free heat exchange layer with an all-coil structure, the tower eliminates common issues associated with conventional open towers, such as packing clogging and aging.
