Products
-
PPH tower
-
FRP Cooling Tower
-
FRP pipes
-
Round Counterflow Cooling Tower
-
Square cooling towers
-
FRP reaction tanks
-
Cooling Tower
-
FRP chimneys
-
FRP Mixing Tank
-
Scrubbing tower
-
FRP Liquid Alkali Storage Tank
-
PPH Agitator tank
-
Circular cooling towers
-
Calcium Chloride EPC Project
-
FRP Wastewater Storage Tank
-
PPH storage tank
FRP Desulfurization Tower
The internal structure design is reasonable, such as the use of efficient spray devices, fillers, etc., which can fully contact the flue gas with the desulfurizer, undergo chemical reactions, and effectively remove sulfur dioxide and other sulfides in the flue gas. The desulfurization efficiency can usually reach over 90%, or even higher, and can meet strict environmental emission standards.
Description
marker
The internal structure design is reasonable, such as the use of efficient spray devices, fillers, etc., which can fully contact the flue gas with the desulfurizer, undergo chemical reactions, and effectively remove sulfur dioxide and other sulfides in the flue gas. The desulfurization efficiency can usually reach over 90%, or even higher, and can meet strict environmental emission standards.
-Optimization of the internal flow channel design of the tower body ensures smooth flue gas flow and low resistance loss, which can reduce fan energy consumption, lower operating costs, and also benefit the stable operation of the entire desulfurization system.
-Fiberglass material has a low density and is much lighter in weight compared to traditional metal desulfurization towers. It is easy to transport and install, and has low requirements for the bearing capacity of the foundation, which can reduce the cost of infrastructure construction.
contact us
Related popular products
Square cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
FRP anode tubes
Glass Fiber Reinforced Plastic（FRP） anode tubes are widely utilized across various industries, including electronics, petroleum, chemical, power supply, printing, and waste treatment owing to their excellent corrosion resistance, high-temperature tolerance, and other superior properties. We provide comprehensive one-stop services for clients in need, encompassing the design, manufacturing, installation, and after-sales support of anode tubes and their auxiliary facilities.
FRP bromine towers
Glass fiber reinforced plastic (FRP) bromine tower equipment is mainly used to produce bromine. In order to ensure the bromine extraction rate, we have adjusted the spacing, direction, order and angle so as to acidify the brine first and then add chlorine to reduce the amount of chlorine in production.And we add annular baffle plate (efficiency enhancement ring) in the blowout tower and absorption tower, make the brine of the wall into the filler ring for secondary and third blowing,which avoid the bromine in the brine not being blown out and discharged with the waste water, resulting in waste of resources.
FRP on-site winding tanks
Shandong Dahua New Materials Co., Ltd. is a professional manufacturer of glass fiber reinforced plastic（FRP）containers and chemical tower equipment, with rich practical experience.When the diameter of the required FRP container is large and inconvenient to transport, it will give priority to on-site winding production.Our company has carried out on-site winding tank making for many enterprises and has won unanimous praise.
Cooling Tower
The surface of fiberglass cooling towers is smooth and can be made in various colors and shapes, which can coordinate with the surrounding environment and have good decorative properties, especially suitable for places that require environmental aesthetics.
Closed Circuit Cooling Towers
The DGCC Series Tube-and-Header Type Closed Circuit Cooling Towers employ advanced latent heat transfer technology, delivering significantly higher heat exchange efficiency compared to traditional sensible heat transfer methods.Featuring a PVC-free heat exchange layer with an all-coil structure, the tower eliminates common issues associated with conventional open towers, such as packing clogging and aging.
PPH storage tank
The main processes of PPH equipment manufacture include tank extrusion winding,external welding,internal seam welding,nozzle installation, etc..High temperature hot melt spiral extrusion winding technology is adopted in the manufacture of cylinder body, which can improve mechanical strength, safety and reliability of products. PPH equipment with good acid resistance, alkali performance is widely used in chemical, new energy,food and other industries.
FRP Exhaust Gas Absorption Tower
Fiberglass has excellent resistance to acid, alkali, and various chemical substances, and can resist the erosion of complex components in exhaust gas. It is suitable for treating various corrosive exhaust gases, extending equipment service life, and reducing maintenance costs.
Round Counterflow Cooling Tower
The circular structure makes the flow of air inside the tower more uniform.It eliminates airflow dead zones, enabling full mechanical utilization of the tower’s internal space for highly efficient heat exchange with hot water, thereby boosting cooling efficiency.
Horizontal FRP Tanks
Glass fiber reinforced plastic（FRP） tank is a kind of glass fiber reinforced plastic products. It is a new type of composite material made by glass fiber and resin and wound by a microcomputer controlled machine. It is composed of corrosion resistant lining layer, seepage proof layer, fiber winding strengthening layer and outer protective layer with high resin content.
Square Counterflow Cooling Tower
It adopts the principle of counterflow cooling: hot water flows uniformly down from the top of the cooling tower, while air flows upward from the bottom of the tower, forming counterflow heat exchange. This method enables full contact between hot water and cold air, prolongs heat exchange time, and improves cooling efficiency. Compared to other cooling methods, it can more effectively reduce water temperature.
Air cooled heat exchanger
Air cooler of finned tube bundle, blower, motor, shutter and maintenance platform and frame parts, divided into drum wind, wind,inclined top three.Operation of the air cooler are cooled material through the tube, air under the action of fan, cross from outside fin tube, using the temperature difference between the two, make the high temperature material of tube cooling and condensation.
FRP chimneys
The fiberglass chimney is processed by winding with FRP(Fiberglass Reinforced Plastic)raw materials.The product has the characteristics of low cost,short production cycle,long service life,light weight,high strength,high rigidity,simple installation,smooth inner and outer surfaces,good anti-aging performance,and excellent corrosion resistance.Moreover,sprayers,filters,etc.can be conveniently added to absorb the harmful components in the flue gas.
PPH Agitator tank
The agitator of various types and materials has the same corrosion resistance as the tank.It is used for chemical reactions such as neutralization,oxidation, reduction, precipitation, flocculation, preparation, mixing and dilution of chemical media.lt can replace and make up the deficiency of stainless steel, glass lining, glass lining and fiberglass equipment.
FRP Mixing Tank
The noise generated by the fiberglass mixing tank during operation is relatively small, because the fiberglass material itself has certain shock absorption and noise reduction performance.
FRP Wastewater Storage Tank
Utilizing an integral molding process, the tank has no welds, or any seams are specifically processed. This effectively avoids leakage issues common in traditional metal storage tanks caused by factors like corrosion at welded joints. It ensures the safety of stored substances and prevents environmental contamination.
