Products
-
Air cooled heat exchanger
-
FRP Mixing Tank
-
FRP bromine towers
-
Scrubbing tower
-
FRP anode tubes
-
FRP Wastewater Storage Tank
-
FRP on-site winding tanks
-
FRP Liquid Alkali Storage Tank
-
Circular cooling towers
-
Potassium Sulfate EPC Project
-
Round Counterflow Cooling Tower
-
FRP Hydrochloric Acid Tank
-
FRP Desulfurization Tower
-
FRP pipes
-
Square Counterflow Cooling Tower
-
FRP reaction tanks
FRP chimneys
The fiberglass chimney is processed by winding with FRP(Fiberglass Reinforced Plastic)raw materials.The product has the characteristics of low cost,short production cycle,long service life,light weight,high strength,high rigidity,simple installation,smooth inner and outer surfaces,good anti-aging performance,and excellent corrosion resistance.Moreover,sprayers,filters,etc.can be conveniently added to absorb the harmful components in the flue gas.
Description
marker
The fiberglass chimney is processed by winding with FRP(Fiberglass Reinforced Plastic)raw materials.The product has the characteristics of low cost,short production cycle,long service life,light weight,high strength,high rigidity,simple installation,smooth inner and outer surfaces,good anti-aging performance,and excellent corrosion resistance.Moreover,sprayers,filters,etc.can be conveniently added to absorb the harmful components in the flue gas.
Features of FRP Chimney
1.The FRP chimney has good corrosion resistance and anti-aging performance under high temperatures.
2.In the winter in the north or in places that require thermal insulation,the FRP chimney can achieve a good thermal insulation effect without an insulation layer or a heat preservation layer.This is determined by the characteristic of slow heat transfer of the FRP material.
3.The FRP chimney is lower in cost compared with other chimneys.
4.The FRP chimney made of fiberglass has a relatively long service life.
5.Due to the relatively small specific gravity of FRP,compared with other metal products,it is easier to transport.Therefore,it saves more supporting steel quantity and the comprehensive installation cost is lower.
Application Scope
The FRP chimneys produced by our factory are now widely used in industries such as electricity,fertilizer,chemical engineering,smelting,and petroleum,serving as emission equipment for corrosive high-temperature flue gas.
contact us
Related popular products
Horizontal FRP Tanks
Glass fiber reinforced plastic（FRP） tank is a kind of glass fiber reinforced plastic products. It is a new type of composite material made by glass fiber and resin and wound by a microcomputer controlled machine. It is composed of corrosion resistant lining layer, seepage proof layer, fiber winding strengthening layer and outer protective layer with high resin content.
Circular cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
Wet electrostatic precipitator
Wet electrostatic precipitator equipment has the powerful function of capturing fog droplets, dust and fine dust particles in flue gas, and it has many years of successful application performance in domestic chemical, smelting, building materials and other industries, and has nearly 30 years of history in foreign coal-fired power plants.
FRP bromine towers
Glass fiber reinforced plastic (FRP) bromine tower equipment is mainly used to produce bromine. In order to ensure the bromine extraction rate, we have adjusted the spacing, direction, order and angle so as to acidify the brine first and then add chlorine to reduce the amount of chlorine in production.And we add annular baffle plate (efficiency enhancement ring) in the blowout tower and absorption tower, make the brine of the wall into the filler ring for secondary and third blowing,which avoid the bromine in the brine not being blown out and discharged with the waste water, resulting in waste of resources.
Round Counterflow Cooling Tower
The circular structure makes the flow of air inside the tower more uniform.It eliminates airflow dead zones, enabling full mechanical utilization of the tower’s internal space for highly efficient heat exchange with hot water, thereby boosting cooling efficiency.
Square cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
FRP Wastewater Storage Tank
Utilizing an integral molding process, the tank has no welds, or any seams are specifically processed. This effectively avoids leakage issues common in traditional metal storage tanks caused by factors like corrosion at welded joints. It ensures the safety of stored substances and prevents environmental contamination.
FRP Corrosion-Resistant Tank
It can resist the erosion of various chemical substances such as acid, alkali, salt, etc., and is suitable for storing and processing various corrosive media. It can greatly reduce the risk of tank damage and leakage caused by corrosion, and extend the service life of equipment.
Scrubbing tower
The FRP scrubbing tower mainly takes the vertical counter-current FRP scrubbing tower as the leading product. It utilizes the contact between the waste gas and the liquid, in which the liquid adsorbs the pollutants, and then separates the clean gas from the contaminated liquid to achieve the purpose of purification.
FRP Liquid Alkali Storage Tank
Good corrosion resistance: Fiberglass can withstand the corrosion of liquid alkali, prevent the tank from being corroded, extend service life, and reduce the risk of liquid alkali leakage caused by tank corrosion.
Air cooled heat exchanger
Air cooler of finned tube bundle, blower, motor, shutter and maintenance platform and frame parts, divided into drum wind, wind,inclined top three.Operation of the air cooler are cooled material through the tube, air under the action of fan, cross from outside fin tube, using the temperature difference between the two, make the high temperature material of tube cooling and condensation.
FRP anode tubes
Glass Fiber Reinforced Plastic（FRP） anode tubes are widely utilized across various industries, including electronics, petroleum, chemical, power supply, printing, and waste treatment owing to their excellent corrosion resistance, high-temperature tolerance, and other superior properties. We provide comprehensive one-stop services for clients in need, encompassing the design, manufacturing, installation, and after-sales support of anode tubes and their auxiliary facilities.
FRP water tanks
Glass Fiber Reinforced Plastic (FRP) water tank is a kind of water storage equipment made of composite materials.The tank is manufactured through high-temperature and high-pressure molding processes. It uses food-grade resins and fiberglass reinforcement, which guarantees water safety and hygiene standards.The product features a modular design with diversified standard panel specifications and optional thickness configurations.The water tank has the advantages of anti-aging, anti-leakage, easy to clean, and long service life.
Cooling Tower
The surface of fiberglass cooling towers is smooth and can be made in various colors and shapes, which can coordinate with the surrounding environment and have good decorative properties, especially suitable for places that require environmental aesthetics.
FRP Scrubber Tower
Made of fiberglass material, it has good resistance to chemicals such as acid, alkali, and salt, and can be used to handle various corrosive gases and liquids. It can effectively resist the erosion of chemicals and extend the service life of equipment.
