Products
-
Square cooling towers
-
PPH storage tank
-
FRP pipes
-
Horizontal FRP Tanks
-
FRP on-site winding tanks
-
Calcium Chloride EPC Project
-
FRP chimneys
-
FRP Scrubber Tower
-
FRP Hydrochloric Acid Tank
-
FRP Corrosion-Resistant Tank
-
FRP Desulfurization Tower
-
Closed Circuit Cooling Towers
-
FRP Reactor
-
Vertical FRP Tank
-
FRP Cooling Tower
-
Evaporative condenser
FRP anode tubes
Glass Fiber Reinforced Plastic（FRP） anode tubes are widely utilized across various industries, including electronics, petroleum, chemical, power supply, printing, and waste treatment owing to their excellent corrosion resistance, high-temperature tolerance, and other superior properties.
We provide comprehensive one-stop services for clients in need, encompassing the design, manufacturing, installation, and after-sales support of anode tubes and their auxiliary facilities.
Description
marker
We provide comprehensive one-stop services for clients in need, encompassing the design, manufacturing, installation, and after-sales support of anode tubes and their auxiliary facilities. The characteristics of the anode tube are as follows:
1) Light weight and high strength: The anode tube is made of FRP,so it has light weight and its tensile strength is similar to ordinary carbon steel.
2) Good corrosion resistance and flame retardancy: Manufactured with flame-retardant vinyl ester resin, the anode tubes exhibit outstanding flame resistance and superior corrosion resistance, effectively withstanding most acidic, alkaline, and saline corrosive medium.
3) High performance and good conductivity: Premium carbon fiber is employed as the conductive layer, delivering excellent electrical conductivity. And both surface resistance and volume resistivity rank among the leading levels domestically.
4) Wide range of flexibility: due to the use of standardized mold , the high fiber content and high strength of the product are ensured, and the product is flexible and adjustable to meet different needs.
contact us
Related popular products
Air cooled heat exchanger
Air cooler of finned tube bundle, blower, motor, shutter and maintenance platform and frame parts, divided into drum wind, wind,inclined top three.Operation of the air cooler are cooled material through the tube, air under the action of fan, cross from outside fin tube, using the temperature difference between the two, make the high temperature material of tube cooling and condensation.
Scrubbing tower
The FRP scrubbing tower mainly takes the vertical counter-current FRP scrubbing tower as the leading product. It utilizes the contact between the waste gas and the liquid, in which the liquid adsorbs the pollutants, and then separates the clean gas from the contaminated liquid to achieve the purpose of purification.
PPH Agitator tank
The agitator of various types and materials has the same corrosion resistance as the tank.It is used for chemical reactions such as neutralization,oxidation, reduction, precipitation, flocculation, preparation, mixing and dilution of chemical media.lt can replace and make up the deficiency of stainless steel, glass lining, glass lining and fiberglass equipment.
FRP Corrosion-Resistant Tank
It can resist the erosion of various chemical substances such as acid, alkali, salt, etc., and is suitable for storing and processing various corrosive media. It can greatly reduce the risk of tank damage and leakage caused by corrosion, and extend the service life of equipment.
Potassium Sulfate EPC Project
Based on the original German Mannheim process for potassium sulfate production, we have conducted...
Circular cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
Evaporative condenser
Based on the working principle of thermodynamic heat transfer, the evaporative condenser makes the high-temperature gaseous refrigerant in the coil exchange heat with the spray water and air outside the coil. The super wind force of the induced draft fan makes the spray water completely cover the surface of the coil, and the heat exchange effect is significantly increased by the wind force of the water. After absorbing heat spray water and air temperature, some water from liquid to gas, the latent heat of evaporation take away a lot of heat, heat the water in the air is dehydrator intercept and collected the water in the heat transfer in heat transfer layer by air cooling, temperature lowering into the sump tank, by circulating water pump to spray again continue to cycle in the system. The water evaporating into the air is automatically replenished by the control of the floating ball valve .
Horizontal FRP Tanks
Glass fiber reinforced plastic（FRP） tank is a kind of glass fiber reinforced plastic products. It is a new type of composite material made by glass fiber and resin and wound by a microcomputer controlled machine. It is composed of corrosion resistant lining layer, seepage proof layer, fiber winding strengthening layer and outer protective layer with high resin content.
FRP Reactor
The fiberglass reaction vessel has good anti-corrosion and temperature resistance, making it a high-performance and easy-to-use reaction vessel.
FRP Hydrochloric Acid Tank
Fiberglass has excellent corrosion resistance to hydrochloric acid, which can effectively resist the erosion of hydrochloric acid, prevent the tank from being corroded and perforated, and extend the service life of the storage tank.
Square cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
FRP water tanks
Glass Fiber Reinforced Plastic (FRP) water tank is a kind of water storage equipment made of composite materials.The tank is manufactured through high-temperature and high-pressure molding processes. It uses food-grade resins and fiberglass reinforcement, which guarantees water safety and hygiene standards.The product features a modular design with diversified standard panel specifications and optional thickness configurations.The water tank has the advantages of anti-aging, anti-leakage, easy to clean, and long service life.
FRP chimneys
The fiberglass chimney is processed by winding with FRP(Fiberglass Reinforced Plastic)raw materials.The product has the characteristics of low cost,short production cycle,long service life,light weight,high strength,high rigidity,simple installation,smooth inner and outer surfaces,good anti-aging performance,and excellent corrosion resistance.Moreover,sprayers,filters,etc.can be conveniently added to absorb the harmful components in the flue gas.
FRP Mixing Tank
The noise generated by the fiberglass mixing tank during operation is relatively small, because the fiberglass material itself has certain shock absorption and noise reduction performance.
FRP Exhaust Gas Absorption Tower
Fiberglass has excellent resistance to acid, alkali, and various chemical substances, and can resist the erosion of complex components in exhaust gas. It is suitable for treating various corrosive exhaust gases, extending equipment service life, and reducing maintenance costs.
