Products
-
FRP on-site winding tanks
-
Cooling Tower
-
FRP Liquid Alkali Storage Tank
-
Closed Circuit Cooling Towers
-
FRP anode tubes
-
FRP Desulfurization Tower
-
PPH Agitator tank
-
Round Counterflow Cooling Tower
-
FRP chimneys
-
FRP water tanks
-
FRP reaction tanks
-
Vertical FRP Tank
-
FRP Exhaust Gas Absorption Tower
-
PPH storage tank
-
FRP pipes
-
Scrubbing tower
Air cooled heat exchanger
Air cooler of finned tube bundle, blower, motor, shutter and maintenance platform and frame parts, divided into drum wind, wind,inclined top three.Operation of the air cooler are cooled material through the tube, air under the action of fan, cross from outside fin tube, using the temperature difference between the two, make the high temperature material of tube cooling and condensation.
Description
marker
Air cooler of finned tube bundle, blower, motor, shutter and maintenance platform and frame parts, divided into drum wind, wind,inclined top three.Operation of the air cooler are cooled material through the tube, air under the action of fan, cross from outside fin tube, using the temperature difference between the two, make the high temperature material of tube cooling and condensation.
Air cooler has the advantage of using the natural air as cooling medium, 100% water saving and protecting the natural environment Comparing with the tube shell type water cooling system is to save water, reduce environmental pollution, low investment, easy operation and low operation maintenance cost and long service life,etc.
Can be widely used in petrochemical, chemical, metallurgy, power stations and other related industries.
contact us
Related popular products
PPH Agitator tank
The agitator of various types and materials has the same corrosion resistance as the tank.It is used for chemical reactions such as neutralization,oxidation, reduction, precipitation, flocculation, preparation, mixing and dilution of chemical media.lt can replace and make up the deficiency of stainless steel, glass lining, glass lining and fiberglass equipment.
FRP bromine towers
Glass fiber reinforced plastic (FRP) bromine tower equipment is mainly used to produce bromine. In order to ensure the bromine extraction rate, we have adjusted the spacing, direction, order and angle so as to acidify the brine first and then add chlorine to reduce the amount of chlorine in production.And we add annular baffle plate (efficiency enhancement ring) in the blowout tower and absorption tower, make the brine of the wall into the filler ring for secondary and third blowing,which avoid the bromine in the brine not being blown out and discharged with the waste water, resulting in waste of resources.
PPH storage tank
The main processes of PPH equipment manufacture include tank extrusion winding,external welding,internal seam welding,nozzle installation, etc..High temperature hot melt spiral extrusion winding technology is adopted in the manufacture of cylinder body, which can improve mechanical strength, safety and reliability of products. PPH equipment with good acid resistance, alkali performance is widely used in chemical, new energy,food and other industries.
Scrubbing tower
The FRP scrubbing tower mainly takes the vertical counter-current FRP scrubbing tower as the leading product. It utilizes the contact between the waste gas and the liquid, in which the liquid adsorbs the pollutants, and then separates the clean gas from the contaminated liquid to achieve the purpose of purification.
Potassium Sulfate EPC Project
Based on the original German Mannheim process for potassium sulfate production, we have conducted...
Wet electrostatic precipitator
Wet electrostatic precipitator equipment has the powerful function of capturing fog droplets, dust and fine dust particles in flue gas, and it has many years of successful application performance in domestic chemical, smelting, building materials and other industries, and has nearly 30 years of history in foreign coal-fired power plants.
Square Counterflow Cooling Tower
It adopts the principle of counterflow cooling: hot water flows uniformly down from the top of the cooling tower, while air flows upward from the bottom of the tower, forming counterflow heat exchange. This method enables full contact between hot water and cold air, prolongs heat exchange time, and improves cooling efficiency. Compared to other cooling methods, it can more effectively reduce water temperature.
FRP Exhaust Gas Absorption Tower
Fiberglass has excellent resistance to acid, alkali, and various chemical substances, and can resist the erosion of complex components in exhaust gas. It is suitable for treating various corrosive exhaust gases, extending equipment service life, and reducing maintenance costs.
FRP Scrubber Tower
Made of fiberglass material, it has good resistance to chemicals such as acid, alkali, and salt, and can be used to handle various corrosive gases and liquids. It can effectively resist the erosion of chemicals and extend the service life of equipment.
FRP pipes
FRP pipe is a kind of computer-controlled mechanical winding from the production of products, is a light,high-strength,corrosion-resistant non-metallic pipe.It is made of resin as matrix and glass fiber as reinforcing material by special process. lt has the advantages of corrosion resistance,anti-leakage,heat insulation,light weight, high strength,long service life,strong designability,small fluid resistance,convenient installation and low cost,etc.
FRP Liquid Alkali Storage Tank
Good corrosion resistance: Fiberglass can withstand the corrosion of liquid alkali, prevent the tank from being corroded, extend service life, and reduce the risk of liquid alkali leakage caused by tank corrosion.
Circular cooling towers
Glass fiber reinforced plastic (FRP) cooling towers are categorized into cross-flow, counter-flow, spray-type, and non-powered types, featuring rational structural designs with concrete supporting frameworks. These FRP cooling towers demonstrate excellent cooling efficiency, low noise levels, minimal water splashing, stable performance, easy maintenance, and large circulating water capacity, making them suitable for various industrial recirculating water systems.
Cooling Tower
The surface of fiberglass cooling towers is smooth and can be made in various colors and shapes, which can coordinate with the surrounding environment and have good decorative properties, especially suitable for places that require environmental aesthetics.
Closed Circuit Cooling Towers
The DGCC Series Tube-and-Header Type Closed Circuit Cooling Towers employ advanced latent heat transfer technology, delivering significantly higher heat exchange efficiency compared to traditional sensible heat transfer methods.Featuring a PVC-free heat exchange layer with an all-coil structure, the tower eliminates common issues associated with conventional open towers, such as packing clogging and aging.
FRP Cooling Tower
Adopting efficient heat dissipation design, hot water can be quickly cooled to the required temperature through heat exchange between air and water. With its high cooling efficiency,it can meet the cooling water temperature requirements for different production processes and equipment operations .
